Zolid Sim Card Reader Driver Zip
Download >>>>> https://cinurl.com/2sBACf
Note: The camera is usually used by a user to verify whether the card reader is connected correctly or not. However, unlike many other applications, the card reader is disabled automatically after a certain period of time (default: 20 seconds). If the camera shows the card reader as \"normal\", 54d8c1d41, a card reader driver has not been installed correctly. Other users need to install a card reader driver for SIM7600X, and then follow this tutorial:
2.Place the USB-C 3.2 Gen 2 cable to the back of the computer, the lower red is the data port, the upper is the power port.3.Plug the cables into the USB port of the 4G HAT. There should be a notification on the card reader screen saying \"USB-C: Connect device ( 2 : 3.2 Gen 2 ), expecting a Mass storage\" when the cable is plugged in correctly.4.Plug SIM7600X in the USB port. There should be a notification on the card reader screen saying \"Data: Connected to the USB port\".5.Select From Device, Press Enter when the zip file is in the main directory. This step is necessary to complete the connection.6.Select From Device, Press Enter when the zip file is in a subdirectory, this step is necessary to complete the connection.7.Once the connection is complete, the card reader is ready to be used. If there is no icon on the card reader's screen, you can connect to the device manually by entering the host's IP address on the card reader or selecting the Data flow tab, where the main screen is a simplified version of the application's main screen. Note: Use the Host URL1 to enter the menu of the network settings to manually set the DNS and IP address.8.Make sure the SIM7600 card reader is connected to the 4G HAT, launch the software, select SIM7600X card reader on the left, and click the OK button. 7211a4ac4a